Aventics pre filter unit, Series AS2-FLP, 0.3 Micron in 1/4", 3/8" or 1/2", 16 Bar and 400 l/m and 900 l/m and available in Semi Auto Drain and Fully Auto Drain.
Pre Filter, can be assembled into blocks
Condensate Drain: semi-automatic, open without pressure and fully automatic, open without pressure
Filter porosity: 0.3 µm
Sealing material: Acrylonitrile butadiene rubber
Filter resevoir volume: 12cm3
Filter element: Exchangeable
Nominal flow Qn: 400 l/m and 900 l/m
Compressed air connection: G 1/4 and G 3/8 and G 1/2
Vertical mounting orientation
Medium: compressed air neutural gases
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information".
Suitable for use in Ex zones 1, 2, 21, 22
A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details.
Also suitable for separation of fluid oil or water due to the design.
Covering product codes: