InoxMIM Industrial Centrifugal Pump - FL31CI
The InoxMIM FluidMIM FL31CI industrial centrifugal pumps are used mainly for decanting liquids in the food, chemical and winery industries. The simplicity of the pump parts allows easy maintenance. Please continue reading below for more information >>>
The InoxMIM FluidMIM FL31CI industrial centrifugal pumps are used mainly for decanting liquids in the food, chemical and winery industries. The simplicity of the pump parts allows easy maintenance. These pumps have been designed specifically for hygienic use (whereas the EBARA pump, for example, is designed for water use and many sellers will change the seals and other parts on the EBARA units to bring them closer to the hygienic specification.) The full unit has been made with the higher quality 316 stainless steel.
Level of finish: Industrial / Foodstuff
Half-open impeller - the open impeller makes it easier to clean, allows small solids to pass and there are no hidden surfaces.
Temperature range: -5° - 120°C (For beer).
Polishing: 0.8µm. The polishing of the internal surfaces means that there are no areas where bacteria or other undesirable materials to adhere to the surfaces of the stainless steel in contact with media. The INOXMIM pump is machine polished after pressing/welding to ensure that there is a smooth surface.
Casing: Pressed stainless steel / clamped (rather than bolted). A clamped unit can be disassembled with just one bolt on the clamp and much more quickly. Clamped units are therefore not prone to bending if overtightened as the unit will experience uniform tightening when clamped.
Simplicity of parts.
IP55 (with shroud) motor protection. (Protection from dust, no harmful residues).
Connections: DIN 11851 or 2576, BSP, CLAMP, SMS, RJT etc.
Inverter for variable speed / flow control.
FOR FURTHER TECHNICAL DATA, PLEASE DOWNLOAD OUR TECHNICAL DATA SHEET ON THE TECHNICAL TAB.
|Product Specification Pdf||Download|
|Applications||Food, Chemicals, Winery|