Omal Standard Pneumatic Actuator - Double Acting

Omal standard double acting pneumatic actuator which can output torque to 8000Nm. Scotch Yoke rolling friction. Self lubricating strips. Rolled cylinder.

Mounting flange according to EN ISO 5211 F03 - F04 - F05 - F07 - F10 - F12 - F14 - F16 - F25.

In accordance with EN 15714-3

Rotation angle 90°

Torque: directly proportional to the air supply (see table).

The code numbers after the DA letters, always correspond to the breakaway torque in Nm by 5,6 bar air supply.

ATEX version in conformity with directive 2014/34/EU.

Temperature: from 0°C to +80°C; from -20°C to +80°C with dry air only. (+150°C in special execution)

Air supply: 5,6 bar; maximum 8,4 bar.

Operating media: compressed filtered air, not necessarily lubricated. (In case of lubricated air, either non detergent oil or NBR compatible oil, must be used.)

Omal standard double acting pneumatic actuator is available in the following product codes: