Peter Paul Model 75 3 Way Normally Closed (Directional Control) Solenoid Valve
1/4" NPT Stainless Steel Solenoid Valve with orifice sizes from 1/16" to 3/16" and pressures up to 350Psi. Grommet or Conduit Coil Housing as standard.
The standard valve has Nitrile (Buna) seals for use with Air, water, and other compatible fluids. Hot water, steam, and many oils will require special seal materials.
PeterPaul dual orifice valves in which the body orifice is closed and sleeve orifice open in the de-energized position. No flow can exist between the inlet and normally closed ports but flow does exist between the inlet and normally open ports.
Standard Specification and Options
Body: Stainless Steel (Std.) or Brass (Opt.)
Internal Components: Stainless Steel. Copper – AC Only.
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Valve Temperature Range: Standard Valves -18°C to 40°C ambient; -18°C to 65°C media.
Orifice Diameter: See download table.
Porting: Standard 1/4" NPT other ports available*
Housing: Grommet and 1/2" NPT conduit - many options available.*
Listings: Most valves are UL and CSA listed.*
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: Grommet Valve: 2.00 lb Conduit Valve: 2.06 lb
Repair Packs: Available for most valves*
Options: Alternate Port Locations, Metering, Manual Override, Alternate Elastomer.
*Consult one of the technical team for more information.
|Product Specification Pdf||Download|