Peter Paul Model EH21 2 Way High Pressure Explosion proof Normally Open Solenoid Valve

1/8" NPT Stainless Steel Solenoid Valve with orifice sizes from 1/32" to 3/32" and pressures up to 3000Psi. Grommet or Conduit Coil Housing as standard with European Style DIN Coils as an option.
The standard valve has a Kel-F Pin seal. Extended orifice guides the sealing pin for perfect alignment.

This valve uses the same kinetic energy impact mechanism as the EH22 but incorporates an internal rocker arm to reverse the action of the sealing pin. The kinetic energy of the plunger is applied to one end of the rocker arm when the coil is de-energized. This lifts the sealing pin, on the opposite end of the rocker arm, against the force of high pressure. A return spring acts directly on the pin, sealing the orifice when the coil is energized. For use on Air and other non-corrosive gasses, water and oil.

Standard Specification and Options

Body: Stainless Steel (Std.)

Internal Components: Stainless Steel. Copper – AC Only.

Filtration: Down to 60 microns or less is recommended.

Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*

Sealing Pin: Kel-F (Std.) Delrin®, Teflon®, Nylon, PEEK, 303 Stainless Steel (Opt.)

Valve Temperature Range: Standard Valves -18°C to 40°C ambient; -18°C to 65°C media.

Orifice Diameter: See download table.

Porting: Standard 1/8" NPT other ports available*

Housing: Flame-Proof Construction with 1/2" NPT conduit

Mounting: Must be mounted within 30° of vertical.

Listings: Valves are UL and CSA certified for Hazardous Locations- Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2 Groups A, B, C, D, E, F, and G.

Life Expectancy: Millions of cycles, depending on application, lubrication, etc.

Valve Weight: 2.38 lbs

Repair Packs: On request*

Options: Alternate PIN materials.

*Consult one of the technical team for more information.